Emos M0430, Инструкция по эксплуатации

Страница: 15 / 200

15
Transistor Measurement (Amplification)
1. Switch to the hFE function.
2. Connect an adapter for measuring transistors into the COM
(minus) socket and the INPUT (plus) socket according to figure
2. make sure the connection is correct!
3. Before you measure, determine whether the transistor has an
NPN or PNP junction and identify the base, emitter and collec-
tor. Connect the outlets from the transistor into the marked
openings in the adapter.
4. The approximate transistor amplification factor (hFE) will appear
on the screen.
(see Fig. 2)
A – Socket for testing capacity
B – Socket for testing transistors
Temperature Measurement
1. Switch to the function and repeatedly press the Select
button to choose between measuring in °C or °F.
2. Connect the black plug (minus) to the COM socket and the red
plug (plus) of the type K thermocouple to the INPUT socket.
3. Carefully touch the end of the thermocouple onto the measured
object. The object must not be live; be mindful of any rotating
parts on various devices. The screen will show the measured
temperature after a few moments.
Note:
The type K thermocouple included with the multimeter is designed
for measuring temperatures between -20 °C and 300 °C. Measuring
temperatures above 300 °C may cause damage to the thermocouple
and the multimeter! If you want to measure higher temperatures,
use a different thermocouple with a higher measurement range!
Capacity Measurement
1. Connect the plug of the black (negative) tipped measuring
conductor into the COM socket and the plug of the red (positive)
measuring tip for measuring capacity into the INPUT socket.
2. Switch to the function.