5
The resulting diameter of the conductors is as shown in the table:
Conductor core diameter [mm]
0.5
0.65
0.8
1
Distance [m]
20
50
70
115
In basic implementation, a coaxial cable is not required. We recommend using a coaxial cable only when conducting video
signal at distances larger than 100 m.
For long ground cabling, you can use a telecommunication cable of category TCEPKPFLE.
Operation of the Device
To ring and call up an image on the monitor, press the button on the door
camera unit shown below:
To accept a call, press this button on the monitor:
To immediately call up the image from the door camera unit, press this button:
To send a signal to the electrical lock and gate, press these buttons:
To call from one monitor to another (intercom function) press this button:
Select a ringtone by simultaneously pressing the following buttons:
then changes ringtones and
confirms your selection.
Adjust volume by turning the regulators located on the side of the monitor.
Menu Controls
Press the MENU button to enter the main menu
Brightness settings
Contrast settings
Colour settings
Menu language settings
Date settings
Time settings
Deleting all photos from memory
Exit the menu
A photo is stored in internal memory immediately after ringing. The memory capacity is 100 pictures.
When it is full, individual photos are automatically overwritten in order from the oldest.
You can view your recordings by pressing buttons / when in stand-by mode.
Device Maintenance
The device is low-maintenance. It is recommended, based on the state of the device, to occasionally wipe the device down
with a moistened cloth.
Warning!
