2
Wireless Doorchime, type H-518
The set consists of a push-button (transmitter) and a door chime (receiver).
The door chime unit has to be permanently connected to electric network (230V AC/50 Hz).
The signal from the push-button to the door chime is transmitted on radio wave frequency 433.92 MHz.
The signal range depends from local conditions and it may be up to 100 m in free space without interference.
The wireless digital door chime has self-learning function for pairing with pushbuttons.
Therefore it is possible to combine with additional pushbuttons.
The advantage of this type of pairing is prevention from interference from other chimes in the neighborhood.
Study the instructions for use to use the wireless door chime properly.
Technical data:
Range: up to 100 m in free space (in built-up areas
the range may drop to one fifth)
Waterproof pushbutton: with IP44 coverage
Melodies: 48
Sound and light signalisation on receiver and transmitter
Operating frequency: 433.92 MHz
Push-button power supply: battery 1× 12V (type A23)
door chime power supply: (230V AC/50 Hz)
Description of buttons:
A – Pairing of door chime unit with pushbutton
B – volume control button (4 levels)
C – choice of melody button
Push button battery change
Remove button
Pushbutton installation on the wall
Pairing of door chime unit with pushbutton
1. Remove the front casing of the pushbutton by pushing the remove button. Insert 1pc of 12V battery (type 23A)
according to the polarity indicated. Place back the front case.
2. Plug in the door chime into wall socket - the learning mode is entered automatically for 20 seconds.
3. Press the ringing button on the push button, Door chime will play the melody, pairing is completed.
GB
