5
weather station, it takes about 12 hours before the weather station begins forecasting correctly. The weather station shows 5
weather forecast icons.
Sunny
Slightly Sunny
Cloudy
Rainy
Snowy
Note: Currently displayed icon means a forecast for the next 12–24 hours. It may not reflect the current state of the weather.
Backlight/selecting display colour
Brightness of the display can be set by a slide switch OFF – LO – HI at the back of the weather station.
OFF – backlight is off
LO – middle level of the backlight
HI – the highest level of the backlight
On the weather station, several modes of display colours can be set.
Note: For the backlight to be activated, the DC adapter must always be connected.
LOOP mode
Press the LOOP button; the display colour of the weather station will automatically be changed in the following sequence: white
> red > orange > yellow > green > turquoise > blue > purple.
RAINBOW mode
If the LOOP mode is activated, turn it off by pressing the LOOP button.
Then repeatedly press RAINBOW.
Each pressing will set a different colour of the display in the following sequence: white > red > orange > yellow > green >
turquoise > blue > purple.
TUNE mode
If the LOOP mode is activated, turn it off by pressing the LOOP button.
Then repeatedly press, or press and hold, the TUNE button.
In this way, you can also set the following colours and their shades: white > red > orange > yellow > green > turquoise > blue
> purple.
Light projection of time and indoor/outdoor temperature
Light projection is functional if the weather station is connected to DCv adapter.
Example of the projection display:
Time will be dis rotation of the indoor and outdoor temperature.
Use the projection at a distance of 1–4 meters from the projected surface.
Press the
button to reverse the image of the projection.
The projector part can be manually set within ±90°.
To focus projection, use the FOCUS button at the rear of the projector.
Sensor batteries low
When the
icon is displayed on the weather station at the bottom left of the outdoor temperature, the batteries in the
sensor are low.
Replace them with new ones.
After inserting the new batteries into the sensor, press the RESET button at the back of the sensor and press and hold the DOWN
button on the weather station; it will find the signal from the sensor.
If the weather station displays incorrect data or does not respond to button pressing, press with a thin tool (e.g. a pencil) the
RESET button at the back of the weather station.
This will erase all data; you will need to readjust the weather station.
Care and Maintenance
The product is designed to provide trouble-free service for many years if used appropriately.
Here is some advice for proper operation:
• Read the manual carefully before using this product.
• Do not expose the product to direct sunlight, extreme cold and moisture, and sudden changes in temperature. This would
reduce accuracy of detection.
• Do not place the product in locations prone to vibration and shocks – these may cause damage.
