Page 7
ATTENTION
• This instruction manual is referred to " INDUCTION COOKERS " 700 Professional series.
• It is necessary to refer to it for any information concerning the appliance installation, use and maintenance.
• The Manufacturer declines any responsibility for damages resulting from the non-observance of the operating and
installation instructions or from an unsuitable use of the appliance.
• The Manufacturer doesn’t assume any responsibility in case the appliance connection shouldn’t be carried out
according to the regulations in force.
• This manual must be kept for all the life of the appliance and it should be kept at the disposal of the users in case of
need.
• The manufacturing co. declines every responsability for possible mistakes contained in this booklet imputable to
printing or transcription errors.
• It also reserves the right to bring changes to the product if retained useful or necessary whitout jeopardizing the
essential characteristics.
• The manufacturing co. declines any responsability for damages caused directly or indirectly due to erroneous
assembly, tampering, bad maintenance, lack of skill.
N.B. : “ If the equipment is placed against walls, dividing panels, wooden furnitures, etc....., these must be
of fire-proof material; if not, these must be covered with fire-proof material. In case of central
positioning of the equipment, their rear part should be protected with cohibented panels in order to
prevent accidents due to burns. Fire preventions rules must be carefully followed.
I.
INSTALLATION INSTRUCTIONS
1.
INSTALLATION INSTRUCTIONS
• Before proceeding with the installation peel off the protection film, remove any residual with a product suitable to
clean the stainless steel.
• Install the equipment orizontally obtaining the correct level bu means of the adjustable feet.
• The equipment can be installed alone or in a set taking care not to place it beside combustible products.
1.1
TECHNICAL PLATE
• The identification plate (Pic. 1) is positioned externally, on the left side of the machine.
• The identification plate indicates all machine data necessary in case of failure or maintenance.
Pic. 1
