12
Step 2.
After the software installation is complete, click the icon to run the App. Figure1 is the
main screen “Camera List” window.
Default uCare Cam password : 0000
Manager’s Name : admin
Manager’s Password : 0000
2. Install new uCare Cam - Router mode
Step 1. Power On
Plug the power adapter DC connector into the DC input port of uCare Cam and then plug the
power adapter into a wall outlet. Use only the power adapter provided. The status LED on the
uCare Cam will turn green for about 15 seconds. Then the status LED will flash red for about 15
seconds before alternating between Red and Green.
Step 2. Router Link Mode
Wait until the status LED color alternates between Red and Green. If the
LED does not become Red and Green, use a thin rod to press and hold
the WPS/REST button on the side of uCare Cam for more than 10
seconds to restart the uCare Cam. You can release the button once the
green LED lights up, pauses, the red LED flashes twice and then
becomes a steady green LED light. Wait until the status LED color
alternates between Red and Green.
Figure1
