014
Operation
Operation
MTRX2 Power Requirements:
The MTRX2 is pre-configured at the factory for 100, 110-120 or 230-240VAC operation at
50 or 60Hz depending on customer requirements. Please make sure to check that the Voltage
Indicator label on the back of the MTRX2, under the power inlet, matches the correct
voltage before installation.
The MTRX2 is capable of incredible performance due to its ability to
deliver huge amounts of power instantaneously to drive the most
complex and difficult loads. Depending on listening habits and
speakers used the limiting factor may be your electrical service.
For optimum performance and to take full advantage of the MTRX2’s
remarkable power handling capabilities we strongly recommend that
each MTRX2 amplifier be configured and installed on its own
dedicated AC circuit. For maximum power each MTRX2 should be
configured and installed on its own dedicated 230-240VAC circuit.
Building regulations and electrical codes differ from location to
location and country to country. Please consult a local licensed
electrician with regards to installation of the dedicated AC circuits
for the MTRX2 amplifiers.
Voltage Indicator Label
MTRX2 AMPLIFIER OWNER’S MANUAL
© 2017 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
