010
Installation
Installation
Location & Precautions:
• Install MTRX2 amplifier on a solid level surface.
• Install the MTRX2 in a dry and well ventilated location out of direct sunlight.
• Allow at least 60cm or 2 feet of clearance behind the amplifier for power cords and cable
clearance.
• Allow at least 30cm or 1 foot of clearance above and around the amplifier for proper heat
dissipation.
• Do not cover amplifier with custom cover during standby or operation.
• Do not cover or obstruct ventilation holes or heatsinks.
• Do not place the MTRX2 close to low level components. The MTRX2 is a power amplifier
capable of producing large output currents and hence large magnetic fields which can
interfere and induce noise in sensitive components.
• Do not install or expose the MTRX2 to sources of heat or open flame, steam, water,
dampness, excessive humidity, smoke or dust.
The MTRX2 amplifier must be connected to a mains socket outlet with a protective earthing
connection (grounding pin). Do not install a “ground lifter” or “cheater” adaptors.
MTRX2 AMPLIFIER OWNER’S MANUAL
© 2017 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
