Carefully unpack the unit and check for damage to the unit or to the cables supplied.
Retain the packing in case of future need, e.g. returning the unit for calibration.
Check the contents, as follows:
• One
EAOM-6
unit.
• Operating Manual.
• Screw fixings.
• RS-232 Cable.
Before commencing installation:
• Disconnect all electrical power to the machine.
• Make sure the machine cannot operate during installation.
• Follow all of the machine manufacturers' safety warnings.
• Read and follow all installation instructions.
Report any shortage or damage to your local sales office as soon as possible.
A visual inspection of this product for possible damage occured during shipment is
recommended before installation. It is your responsibility to ensure that qualified
mechanical and electrical technicians install this product.
Be sure to use the rated power supply voltage to protect the unit against damage and to
prevent failure.
Keep the power off until all of the wiring is completed so that electric shock and trouble
with the unit can be prevented.
Never attempt to disassemble, modify or repair this unit. Tampering with the unit may
results in malfunction, electric shock or fire.
Do not use the unit in combustible or explosive gaseous atmospheres.
During the equipment is putted in hole on the metal panel while mechanical installation
some metal burrs can cause injury on hands, you must be careful.
Montage of the product on a system must be done with it’s own fixing screws. Do not do
the montage of the device with inappropriate fixing screws. Be sure that device will not fall
while doing the montage.
It is your responsibility if this equipment is used in a manner not specified in this
instruction manual.
Before beginning installation of this product, please read the instruction
manual and warnings below carefully.
2. INSTALLATION
c
8