EMKO EAOM-6 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 40

EMKO EAOM-6 Скачать руководство пользователя страница 19

Operator parameters can be viewed and edited. Parameters are password protected. When the
operator password is entered, it is compared with operator password that is registered inside the

EAOM-6

unit.

All parameters can be viewed and edited in this window. Parameters are password protected.
When the technician password is entered, it is compared with technician password that is
registered inside the

EAOM-6

unit.

This menu allows the user to save configuration files to the disk, read from disk and write to disc

Open

:

This menu allows the user to load the registered configuration files to the PC.

Save

:

This menu allows the user to save the parameters with a name defined by

user.

Print

:

This menu allows the user to print the parameters.

Printer Setup

:

This menu allows the user to select the printer that is connected to network or PC

and change the configuration of the printer.

Exit

:

Exit the program.

This menu is active only when

the Operator or Technician Parameters Window is open. Using this

menu allows the user to upload parameters from the

EAOM-6

unit to the PC or download

from the

PC to the

EAOM-6

unit.

Download

:

With this menu user can load parameters from PC to

EAOM-6

.

Upload

:

User can load the parameters stored on

EAOM-6

unit to PC.

4.3.7 Operator Parameters Window

4.3.8 Technician Parameters Window

4.3.9 MAIN MENU

4.3.9.1 FILE

4.3.9.2 PROGRAMMING

19

«
...
17
18
19
20
21
...
»

Содержание EAOM-6









































Отзывы:

Нет отзывов