The unit is designed for panel mounting.
1.
Insert the unit in the panel cut-out from the front side.
2.
Insert the fixings through the mounting holes and
tighten the fixing screws to secure the unit against the
panel.
Fixing is done
by two screw fixings
2.6 Installation Fixing Screws
the montage of the device with inappropriate fixing screws. Be sure that device will not
fall while doing the montage.
During mechanical installation, beware of
any sharp burrs on the metal panel
aperture. Ensure that the fixings are
properly tightened to prevent the fixings
becoming loose due to panel vibration.
Montage of the unit to a system must be
done with it’s own fixing screws. Do not do
c
1.
Loosen the screws on the fixing
parts on the left and right side of the
device.
2.
Pull the fixing parts through the
2nd direction
3.
Take off the fixing parts.
4.
Pull the unit through the front side
of the panel
Before starting to remove the
unit from panel, power off the
unit and the related system.
2.7 Removing from the Panel
c
11
1
4
2
3