EMIT Limit Comparato, Инструкция по применению

Страница: 3 / 3

EMIT WEST - 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Fax (909) 627-7449
EMIT EAST - One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Fax (781) 575-0172 • Web Site: www.DescoEMIT.com
TB-6566 Page 3 of 6 Revision June 2009
© 2009 DESCO INDUSTRIES INC.
Employee Owned
50421 LIMIT NOMINAL
RESISTANCE % TOLERANCE
OF NOMINAL
RESISTANCE
100K FAIL LOW 89K ±2%
100K PASS 110K ±2%
750K FAIL LOW 675K ±2%
750K PASS 825K ±2%
1M FAIL LOW 909K ±2%
1M PASS 1.10M ±2%
10M PASS 9.09M ±2%
10M FAIL HIGH 11.09M ±2%
35M PASS 31.09M ±2%
35M FAIL HIGH 37.89M ±2%
100M PASS 90.9M ±2%
100M FAIL HIGH 112.9M ±2%
1G PASS 912.9M ±2%
1G FAIL HIGH 1.113G ±2%
Limited Warranty
EMIT expressly warrants that for a period of fi ve (5) years
from the date of purchase, EMIT Limit Comparators will be
free of defects in material (parts) and workmanship (labor).
Within the warranty period, a credit for purchase of replace-
ment EMIT products, or, at EMIT’s option, the product will
be repaired or replaced free of charge. If product credit is
issued, the amount will be calculated by multiplying the un-
used portion of the expected fi ve year life times the original
unit purchase price. Call our Customer Service Department
at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton,
MA) for a Return Material Authorization (RMA) and proper
shipping instructions and address. Please include a copy
of your original packing slip, invoice, or other proof of date
of purchase. Any unit under warranty should be shipped
prepaid to the EMIT factory. Warranty replacements will take
approximately two weeks.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE
IN LIEU OF ALL OTHER PRODUCT WARRANTIES,
EXPRESSED AND IMPLIED, INCLUDING MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE
WHICH ARE SPECIFICALLY DISCLAIMED. The express
warranty will not apply to defects or damage due to acci-
dents, neglect, misuse, alterations, operator error, or failure
to properly maintain, clean or repair products.
Limit of Liability
In no event will EMIT or any seller be responsible or liable
for any injury, loss or damage, direct or consequential, aris-
ing out of the use of or the inability to use the product. Be-
fore using, users shall determine the suitability of the product
for their intended use, and users assume all risk and liability
whatsoever in connection therewith.
50730 - SmartLog X3, Solid State, Keypad, Reader,
Software, 120V
50731 - SmartLog X3, Solid State, Keypad, Reader,
No Software, 120V
50732 - SmartLog X3, Solid State, Keypad, Reader,
Software, Asia
50733 - SmartLog X3, Solid State, Keypad, Reader,
No Software, Asia
50734 - SmartLog X3, Solid State, Laser Scanner,
Software, Euro
50735 - SmartLog X3, Solid State, Laser Scanner,
No Software, Euro
50420 - SmartLog X3 Footwear & Wrist Strap Tester
CALIBRATION
There are no user adjustments on model 50421. Each
value is a fi xed resistor load, any model 50421 that falls
out of specifi cation will need to be sent to factory for
repair. Using a DVM (digital voltmeter), set the meter
to read ohms. The limit that the knob is set on can be
measured using the DVM connected between Banana
1 to Banana 2 and connected between Conductor 1
and Conductor 2. Refer to fi gure 3.