30
|
ENGLISH
6.12 Call repetition (only by text message)
This function enables you to define the number of times the control panel will redial
the phone numbers after the alarm detects an intrusion if the call is not being
answered. The number of Call repetitions can be set from 1 to 9.
The text message to change the amount of repetition of the numbers if alarm is not
turned off is: “20”.
Copy the received text into a new text message, modify the text from 1 to 9 and send
the text message to the GSM-number of the alarm system.
6.13 Disarm Password
Here you can set the Password to disarm the Alarm system by dialing the alarm
systems phone number (see chapter “
By calling the alarm system
”).
The text message to change
the disarm password is: “13”.
Copy the received text into a new text message, modify the text to a 4 digit new
password and send the text message to the GSM-number of the alarm system.
6.14 Removing the registered Accessories
To remove all registered accessories from the EM8615 please send a text message to
the GSM-number of the alarm system.
The text message to remove all the registered wireless accessories from the alarm
system is: “21”.
6.15 Restore factory defaults.
Also called hard reset. This needs to be done when, for example, a new SIM card is
installed.
Push the
button on the back of the alarm system and press the SOS button on the
alarm system simultaneously. Release them after 2 slow and 3 fast beeps. Wait for 10
seconds. If the panel beeps twice the alarm system has been restored to factory
defaults.
The text message to restore the alarm system to factory defaults is: “0000”.
Remark: After you restored the factory defaults you need to switch the alarm system
off and on again!
