Eminent EM6590 E-Domotica Скачать руководство пользователя страница 13

Страница: 13 / 16

ENGLISH

6.3 Mounting the smoke detector

Once you have decided a proper mounting location, according to the information the
previous chapter, you can now start to mount the smoke detector.

1.

Remove the mounting bracket from the housing:

Image 13

Use the mounting bracket to mark drilling and screw holes. Use a marker to mark
the desired drilling location.

Use a 5mm drill to drill the holes. Insert the provided plugs/dowels into the holes.

Screw the mounting bracket to the wall with the provided screws.

Mount the smoke sensor on the mounting bracket by turning it counter-clockwise
on the bracket. Make sure that the smoke detector is screwed tightly.

Image 14

7.0 Testing the smoke sensor

Now that the smoke detector is mounted properly you can test it. Take notice of the
following remarks.

Содержание EM6590 E-Domotica

















Результаты поиска

Содержание EM6590 E-Domotica

Отзывы:

Похожие инструкции для EM6590 E-Domotica

Бренды по названию

Популярные бренды

Eminent EM6590 E-Domotica, Руководство пользователя

Результаты поиска

Содержание EM6590 E-Domotica

Отзывы:

Похожие инструкции для EM6590 E-Domotica

Бренды по названию

Популярные бренды