www.emg.dk
Phone: +45 7023 1585
Head office:
John Tranums Vej 60, DK-6705 Esbjerg Ø
• Place the plate for the wheels on one of the
ends and align it in the center of the tool box.
• When the plate is placed start drilling the holes
in the tool box.
• At first drill the hole in the upper right corner.
• Place a buttonhead bolt in the hole to keep it in
place.
• Now drill the hole in bottom left corner.
• Place a buttonhead bolt in the hole.
• Now the plate will stay in place and we can drill
the last four holes.
• Remove the bolts when all holes have been
drilled.
• Next step before mounting the plate will be
assembling the wheel section.
• The order of all the needed parts must be
placed on the pindbolt as seen on the picture to
the left.
1
4
2
5
6
2 x
1 x
4 x
2 x
1 x
2 x
7 8
3
2
