42
43
You can wipe the bed sensor, electronic unit and
power supply with a damp cloth, neutral cleaning
product or mild disinfectant.
Always disconnect the power supply before clean-
ing the device. Dry all parts well after cleaning.
15. Technical specifications
Model:
IP-9360 (sensor attached is model L-0656)
Wi-Fi
IEEE 802.11 b/g Wi-Fi Transceiver Module.
Compatible with IEEE 802.11b/g/n networks.
Channels 1-11.
Memory:
128 Mbit (16Mbyte)
Operating voltage:
5V DC external power supply
Power supply:
Manufacturer: Globtek Inc.
Model No. GTM41076-0605
100-240V~, 50-60 Hz, 0.16A-0.1A1
Input and output connectors:
Power supply input
Switches and controls:
Reset switch for returning to AP
Signal lights:
2 LEDs: green and red
Mounting:
Floor
Measurements (electronic unit):
ø 63mm x 20mm
Measurements (sensor):
542mm x 70mm x 1,4mm (without cable connection
part)
Cable length:
1.8 meters
Total weight with cable:
230 grams
Surface material and color (sensor):
Artificial leather, black or white
Surface material (casing):
ABS plastic
IP rating:
IP20
14. Cleaning
In the unlikely event that your product needs guarantee ser-
vice, please contact your dealer, distributor or manufacturer.
To avoid any unnecessary inconvenience on your part, we rec-
ommend you read these instructions for use carefully before
seeking guarantee service.
YOUR GUARANTEE
By this Guarantee, Emfit guarantees the product to be free
from defects in materials and workmanship at the date of
original purchase for a period of two (2) years from that date.
If within the guarantee period the product is determined to
be defective (at the date of original purchase) due to improp-
er materials or workmanship, Emfit will, without charge for
labour or parts, repair or (at Emfit’s discretion) replace the
product or its defective parts subject to the terms and limi-
tations below. Emfit may replace defective products or parts
with new or refurbished products or parts. All products and
parts replaced become the property of Emfit.
TERMS
Guarantee services will be provided only if the original invoice
or sales receipt (indicating the date of purchase, model name
and dealer’s name) is presented with the defective product
within the guarantee period. Emfit may refuse free-of-charge
guarantee service if these documents are not presented or if
they are incomplete or illegible. This Guarantee will not apply
if the model name or serial number on the product has been
altered, deleted, removed or made illegible.
This Guarantee does not cover transport costs and risks as-
sociated with transport of your product to and from Emfit.
This Guarantee does not cover:
a) periodic maintenance and repair or parts replacement due
to wear and tear. Notice! Emfit bed sensor wears and tears
significantly faster when installed on soft base like spring
mattress.
b) consumables (components that are expected to require
periodic replacement during the lifetime of a product such as
non-rechargeable batteries)
c) damage or defects caused by use, operation or treatment
of the product inconsistent with normal use
d) damage or changes to the product as a result of:
i. misuse, including:
treatment resulting in physical, cosmetic or surface damage
or changes to the product
failure to install or use the product for its normal purpose or
in accordance with Emfit’s instructions on installation or use
failure to maintain the product in accordance with Emfit’s in-
structions on proper maintenance installation or use of the
product in a manner inconsistent with the technical or safety
laws or standards in the country where it is installed or used
ii. the condition of or defects in systems with which the prod-
uct is used or incorporated except other Emfit’s products de-
signed to be used with the product
iii. use of the product with accessories, peripheral equipment
and other products of a type, condition and standard other
than prescribed by Emfit
iv. repair or attempted repair by persons who are not Emfit
employees
v. adjustments or adaptations without Emfit’s prior written
consent, including:
upgrading the product beyond specifications or features
described in the instructions for use, or modifications to the
product to conform it to national or local technical or safety
standards in countries other than those for which the prod-
uct was specifically designed and manufactured
vi. neglect
vii. accidents, fire, liquids, chemicals, other substances, flood-
ing, vibrations, excessive heat, improper ventilation, power
surges, excess or incorrect supply or input voltage, radiation,
electrostatic discharges including lighting, other external
forces and impacts.
16. Warranty information
Содержание QS
Страница 24: ...Notes ...
