![background image](http://html.mh-extra.com/html/emerson/yarway-7100-series/yarway-7100-series_installation-instructions-manual_101978025.webp)
NetSure
™
-48 VDC Power System
Installation Instructions, IM582127000100 (Revision A, January 9, 2017)
Spec. No: 582127000100, 582127000103
Document Code: IM582127000100
Model No: 7100
Revision A, January 9, 2017
[17]
Switch Setting on IB2 Controller Interface Board
Dip Switch SW1 on the IB2 board is used to set the communications address for this board. Refer to
for SW1 settings. Refer to
for SW1 location.
Perform the following procedure to verify the factory setting. This procedure can also be used to make adjustment on a replacement
circuit card.
Procedure
1.
Ensure SW1 is set per
for circuit card location. Refer to
for switch location.
Table 1.
IB2 Controller Interface Board Switch Setting
Setting
DIP Switch SW1
1
2
IB2-1
OFF
OFF
Switch Setting on Optional EIB Controller Extended Interface Board
Dip Switch SW1 on the optional EIB board is used to set the communications address for this board. Refer to
for SW1 settings.
Refer to
for SW1 location.
Perform the following procedure to verify the factory setting. This procedure can also be used to make adjustment on a replacement
circuit card.
Procedure
1.
Ensure SW1 is set per
for circuit card location. Refer to
for switch location.
Table 2.
Optional EIB Controller Extended Interface Board Switch Setting
Setting
DIP Switch SW1
1
2
EIB-1
OFF
OFF
StockCheck.com