13. Light Kit LED Driver Replacement
(Continued)
26
ETL Model No.: CF590
13.10
Squeeze and unclip the motor AC power connector from
the Light Kit LED Driver connector (Figure 47).
Squeeze and unclip the motor DC power connector from
the Light Kit LED Driver connector (Figure 47).
LIGHT KIT
LED DRIVER
LIGHT KIT
LED DRIVER
CONNECTOR
LIGHT KIT
LED DRIVER
CONNECTOR
MOTOR DC POWER
CONNECTOR
MOTOR AC POWER
CONNECTOR
Figure 47
13.11
Remove the two Phillips head screws from the Old Light
Kit LED Driver (Figure 48).
Retain the screws for future reinstallation.
Gently pull up on the Old Light Kit LED Driver. Remove the
Driver from the motor housing (Figure 48).
Discard the Old Light Kit LED Driver in the correct
recycle bin.
OLD LIGHT KIT
LED DRIVER
REMOVE & RETAIN PHILLIPS
HEAD SCREWS (2)
Figure 48
13.12
Place the New Light Kit LED Driver into the motor
housing, aligning it directly where the Old Driver had been
(Figure 49).
Install the New Light Kit LED Driver to the motor housing
using the two screws previously removed (Figure 49).
NEW LIGHT KIT
LED DRIVER
REINSTALL THE PHILLIPS
HEAD SCREWS (2)
Figure 49
