2. To remove the plug, pull straight out by gripping the knurled portion of
the sliding outer sleeve on the plug.
3. Screw the connector onto the Volts/Tach input on the top of the analyzer.
1.9
Cleaning the Emerson 430 SpeedVue
To remove dirt and debris from the optical window, use a camera-type
blower and brush. Remove fingerprints and smudges by moistening cotton
swabs, and/or optical tissue with isopropyl alcohol and carefully wiping the
optical window. To avoid scratching the window, ensure all loose dirt and grit
are removed by the blower/brush before wet cleaning.
Note
Keep the beam attenuator (dust cap) closed when the Emerson 430
SpeedVue is not in use.
WARNING!
Do not attempt to clean the optical window if the laser is on. Turn off the
power and disconnect the power/signal cable from the Emerson 430
SpeedVue.
User Guide
August 2018
12
