Emerson Smart Wireless Gateway Скачать руководство пользователя страница 60

Страница: 60 / 92

Reference Manual

00809-0200-4420, Rev GA

Section 7: Glossary

April 2013

Glossary

Term

Definition

Latency

The time from when a message leaves a wireless field device until it

reaches the Gateway.

Netmask

A string of 1's and 0's that mask out or hide the network portion of an IP

address leaving only the host component.

Network I.D.

Numeric code that associates wireless field devices to the Gateway. This

code must be identical in the device and the gateway.

Network Manager

Operational function within the Smart Wireless Gateway that

automatically handles all device connections and scheduling of wireless

data.

NTP

Network Time Protocol. Used to keep the system time synchronized

with a network time server.

Path

A wireless connection between two devices in a wireless network. Also

referred to as a hop.

Path Stability

A measure of connectivity between two devices in the wireless network.

Calculated as the ratio of the number of received messages over the

number of expected messages.

Primary Interface

Ethernet 1 or Fiber Optic port that is used for primary host

communications.

Private Network/LAN

A local connection between a Smart Wireless Gateway and a PC/Laptop.

This network is used for commissioning and configuration of the

Gateway.

Reliability

A measure of connectivity between the Gateway and a wireless field

device. Calculated as the ratio of the number of received messages over

the number of expected messages. Takes into account all paths.

RSSI

Received signal strength indication (dBm) for the wireless field device.

Secondary Interface

Ethernet 2 port that is used for backup connection or a maintenance

port for local access.

Security Setup Utility

A software application that enables secure communications between

the Gateway and host system, asset management software, data

historians, or other applications.

Self-Organizing Network

Mesh network technology in which a network manager automatically

handles all device connections and scheduling of wireless data.

Service Denied

The device has been denied bandwidth and can not publish its regular

updates.

TCP/IP

Transmission Control Protocol / Internet Protocol. The protocol that

specifies how data is transmitted over Ethernet.

Update Rate

The interval in which a wireless field device transmits measurement and

status data to the Gateway. Same as Burst Rate.

Wireless Field Device(s)

WirelessHART field devices that are a part of the wireless field network.

Wireless Field Network

WirelessHART network, consisting of Smart Wireless Gateway and

multiple wireless field devices.

Wireless Plant Network

Industrial WiFi network, used to integrate the Wireless Field Network

into the control network.

Содержание Smart Wireless Gateway





























































































Результаты поиска

Содержание Smart Wireless Gateway

Отзывы:

Бренды по названию

Популярные бренды

Emerson Smart Wireless Gateway, Справочное руководство

Результаты поиска

Содержание Smart Wireless Gateway

Отзывы:

Бренды по названию

Популярные бренды