33
Reference Manual
00809-0200-4410, Rev BA
Section 4: Software Setup
February 2014
Software setup
Figure 4-3. Wireless Network in the Network Configuration
Use the following procedure to configure a HART modem for AMS Wireless Configurator:
1.
Open the
Network Configuration
application.
2.
Click
Add…
This is shown in
Figure 4-3
3.
Select
HART modem
and click
Install…
4.
Click
Next
.
5.
Enter a name for the HART modem and click
Next
.
6.
Select the
HART master type
(default is that AMS Wireless Configurator will be the
Primary HART master) and click
Next
.
7.
Select the
COM port
for the HART modem and click
Next
.
8.
Check the box to
Check to support Multi Drop devices
.
9.
Check the box to
Include WirelessHART Adapter
.
10.
Click
Finish
to close the configuration window.
11.
Click
Close
to exit the Network Configuration application.
