Waste Disposal
The mark or symbol on any electrical or electronic product shows that this product may not be
disposed off in a trash bin. Such goods have to be returned to the original vendor or to a properly
authorized collection point.
The black bar underneath the waste bin symbol shows that the product was placed on the
market after 13 August 2005. Alternatively the date of ‘placed on the market’ is shown in place
of the bar symbol.
CE conformance declaration
CE certification is required in EU countries for equipment which is used or operated by the end
user. Products sold or transferred between companies or operated on company premises
(factory floor, laboratory) do not need CE certification.
CE certification can only be granted to complete and operational systems. Boards or subsystems
which cannot provide a useful function on their own do not need CE certification.
Emerson Automation Solutions designs and tests all their products for EMI/EMC conformance.
Products manufactured by Emerson Automation Solutions should normally be suitable for use
in properly designed and produced customer equipment (system boxes or operational systems)
without any major redesign or additional filtering. The system integrator or installer must, in any
case, test for CE compliance and certify this to the end user.
Where Emerson Automation Solutions supplies a complete/functional system for use by end
users in EU countries a CE certificate will be cited in the manuals/documents which are provided
with the products. The CE (and year of certification) symbol is shown on the equipment, typically
on the type or S/N label or close to the power cable entry.
Emerson Automation Solutions have tested their boards using their own card cages (chassis).
Test results of these tests are available upon request.
