Emerson Roxar Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 46

Emerson Roxar Скачать руководство пользователя страница 11

Description

The mechanical retrieval tool is designed to allow pressure balancing through the hollow
or solid plug. When the plug is unfastened from its seat in the access fitting, pipe pressure
starts to flow into the retriever and gradually fills it until the pressure in the tool is identical
to the pipe pressure. Dimensions on the tool internals and sealing surfaces ensure that the
pressure is fully balanced. As a result, the tool moves freely under high pressure
conditions, while users can retrieve and install devices in the access fitting. The telescopic
operation refers to the expanding (out) and collapsing (in) the tool.

WARNING

Risk to Personnel and Equipment: If particles, dirt, or wax are present, the pressure

balance function described above may not provide satisfactory pressure balance in the

mechanical retrieval tool, and the pressure difference can force the mechanical tool to

expand uncontrolled, potentially causing harm to the operators. Therefore, apply

pressure above pipeline pressure to the tool by an external pump.

User Manual

Technical description

ROX000295904

June 2020

www.Emerson.com/Roxar

11

«
...
9
10
11
12
13
...
»

Содержание Roxar















































Отзывы:

Нет отзывов