Emerson Rosemount 8600D Series, Быстрый старт

Страница: 28 / 40

ATEX Marking: II 1 G Ex ia IIC T4 Ga (-60 °C ≤ Ta ≤ +70 °C)
• Ui = 30 VDC
• Ii= 185 mA
• Pi = 1.0 W
• Ci = 0uF
• Li = 0.97 mH
Special conditions for safe use (X):
1. When fitted with 90V transient suppressors, the equipment
is not capable of passing the 500V isolation test. This must
be taken into account upon installation.
2. The enclosure may be made from aluminum alloy and
given a protective polyurethane paint finish; however, care
should be taken to protect it from impact or abrasion when
located in Zone 0.
3. When the equipment is installed, particular precautions
must be taken to ensure taking into account the effect of
process fluid temperature, that the ambient temperature
of the electrical housing of the equipment meets the
marked protection type temperature range.
ATEX Type 'n' certification
• EN 60079-0: 2012 +A11: 2013
• EN 60079-11: 2012
• EN 60079-15: 2010
N1 Certification No. Baseefa12ATEX0180X
ATEX Marking:
II 3 G Ex nA ic IIC T5 Gc (-40 °C ≤ Ta ≤ +70 °C)
Maximum working voltage = 42 Vdc
• Ui = 30 VDC
• Ii= 185 mA
• Pi = 1.0 W
• Ci = 0uF
• Li = 0.97 mH
Special conditions for safe use (X):
1. When fitted with 90V transient suppressors, the
equipment is not capable of passing the 500V isolation
test. This must be taken into account upon installation.
Quick Start Guide April 2018
28 Rosemount 8600 Series Vortex Flowmeter