Emerson Rosemount 708, Справочное руководство

Страница: 30 / 48

The application will go through a series of steps to determine the current input
conditions and set alerts based on this normal operation (
Figure 5-4 ).
Example
Note
If the input conditions are too close to the high or low measurement device limits, the
install and learn function will not be a good method to set the alert levels. In this case,
check configuration conditions and verify the status is before continuing. If current input
conditions do not allow for the install and learn function, use the
Manual or Guided user
alert setup to set alerts.
Figure 5-4: Install and Learn Alert Setup Screen
Guided user alert setup
Guided user alert setup cycles through on-screen prompts to set the alert levels. At each
screen, the current level will be shown along with a field to enter the desired alert level as
seen in
Figure 5-5 .
Procedure
1. To use the guided alert setup, navigate to the configuration menu under guided
setup and select Alert Setup , then Guided User Alert Setup .
2. Follow the on-screen prompts and enter the desired alert levels.
Operation and Maintenance Reference Manual
June 2022 00809-0100-4708
30 Rosemount 708 Wireless Acoustic Transmitter Reference Manual