Emerson Rosemount 550pH, Справочное руководство

Страница: 10 / 26

Figure 2-2: Enter Data on Calibrate Screen
b) In the Calibration menu, go to the "Standardize (grab)" option. Press ENTER
at the installation prompt since the reading should already be stabilized.
Input the Cal pH on the sensor label into the "pH of grab sample" field to
complete the initial sensor standardization.
Note
Use pH sensor prior to expiration date.
See Figure 2-2 .
4. Clip the zip tie, locking the clip in place. Remove the circular warning tag if it is still
present.
See
Figure 2-3 .
Figure 2-3: Clipped Zip Tie
5. Press the slide lock into the unlocked position.
The small lip of the lock should be the side that is pressed in. See Figure 2-4 .
Install the sensor Reference Manual
March 2019 00809-0100-3550
10 Rosemount 550pH