Emerson Rosemount 2230, Справочное руководство

Страница: 147 / 156

137
F
OUNDATION
™
Fieldbus Block Information
F
OUNDATION
™
Fieldbus Block Information
July 2017
Reference Manual
00809-0100-2230, Rev CA
22 FSTATE_VAL5 The preset analog value to use when failure occurs in IN_5. Ignored if
the “Fault state to value 5” in the MO_OPTS parameter is false.
23 FSTATE_VAL6 The preset analog value to use when failure occurs in IN_6. Ignored if
the “Fault state to value 6” in the MO_OPTS parameter is false.
24 FSTATE_VAL7 The preset analog value to use when failure occurs in IN_7. Ignored if
the “Fault state to value 7” in the MO_OPTS parameter is false.
25 FSTATE_VAL8 The preset analog value to use when failure occurs in IN_8. Ignored if
the “Fault state to value 8” in the MO_OPTS parameter is false.
26 FSTATE_STATUS Shows which points are in fault state.
27 UPDATE_EVT This alert is generated by any change to the static data.
28 BLOCK_ALM The block alarm is used for all configuration, hardware, connection
failure or system problems in the block. The cause of the alert is
entered in the subcode field. The first alert to become active will set
the Active status in the Status parameter. As soon as the Unreported
status is cleared by the alert reporting task, another block alert may be
reported without clearing the Active status, if the subcode has
changed.