Emerson Rosemount 2051 Wireless Series, Справочное руководство, Страница: 228 / 250

126
Reference Manual
00809-0100-4100, Rev AA
Appendix A: Specifications and Reference Data
June 2012
Specifications and Reference Data
A.6 Options
Standard configuration
Unless otherwise specified, transmitter is shipped as follows:
Custom configuration
If Option Code C1 is ordered, the customer may specify the following data in addition to the
standard configuration parameters.

Output Information

Transmitter Information

LCD Display Configuration

Hardware Selectable Information

Signal Selection
Refer to the “Rosemount Enhanced 3051 Configuration Data Sheet” document number
00806-0100-4007.
Tagging (3 options available)

Standard SST hardware tag is wired to the transmitter. Tag character height is 0.125 in.
(3,18 mm), 56 characters maximum.

Tag may be permanently stamped on transmitter nameplate upon request, 56
characters maximum.

Tag may be stored in transmitter memory. Character limit is dependent on protocol.
–- WirelessHART: 32 characters
Optional Rosemount 304, 305, or 306 Integral Manifolds
Factory assembled to 3051C and 3051T transmitters. Refer to the following Product Data Sheet
(document number 00813-0100-4839 for Rosemount 304 and 00813-0100-4733 for
Rosemount 305 and 306) for additional information.
Engineering units
Differential/Gage :
Absolute/3051TA :
inH
2
O (Range 0, 1, 2, and 3)
psi (Range 4 and 5)
psi (all ranges)
Low Limit:
0 (engineering units above)
High Limit:
Upper range limit
Output:
Linear
Flange type:
Specified model code option
Flange material:
Specified model code option
O-ring material:
Specified model code option
Drain/vent:
Specified model code option
LCD Display:
Installed or none
Alarm:
High
Software tag:
(Blank)