Emerson Rosemount 1057 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 66

background image

5.3

Choosing Temperature Units and Automatic/Manual

Temperature Compensation

5.3.1

Purpose

Most liquid analytical measurements (except ORP) require temperature compensation.

The Model 1057 performs temperature compensation automatically by applying internal temperature

correction algorithms. Temperature correction can also be turned off. If temperature correction is

off, the Model 1057 uses the temperature entered by the user in all temperature correction

calculations.

5.3.2

Procedure

Follow the menu screens in

Figure 5-1

to select automatic or manual temp compensation, set the

manual reference temperature, and to program temperature units as °C or °F.

5.4

Configuring and Ranging The Current Outputs

5.4.1

Purpose

The Model 1057 accepts inputs from three sensors and has four analog current outputs. Ranging the

outputs means assigning values to the low (0 or 4 mA) and high (20 mA) outputs. This section

provides a guide for configuring and ranging the outputs. Always configure the outputs first.

5.4.2

Definitions

1. Current ouputs - The analyzer provides a continuous output current (4-20 mA or 0-20 mA)

directly proportional to the process variable or temperature. The low and high current outputs can be

set to any value.
2. Assigning outputs - Assign a measurement to outputs 1, 2, 3, or 4.
3. Dampen - Output dampening smooths out noisy readings. It also increases the response time of

the output. Output dampening does not affect the response time of the display.
4. Mode - The current output can be made directly proportional to the displayed value (linear mode)

or directly proportional to the common logarithm of the displayed value (log mode).

S1: 1.234µS/cm 123.4°C

S2: 12.34pH 123.4°C

S3:123.4µS/cm 123.4°C

Temperature

Units: °C

S1 Temp Comp: Auto

S2 Temp Comp: Auto

S3 Temp Comp: Auto

Figure 5-1 Choosing Temperature Units and Manual Auto Temp Compensation

Section 5: Programming the Analyzer - Basics

22

Instruction Manual

LIQ-MAN-1057

Section 5: Programming the Analyzer - Basics

April 2017

«
...
30
31
32
33
34
...
»

Содержание Rosemount 1057



































































Отзывы:

Нет отзывов

Похожие инструкции для Rosemount 1057

Masoneilan 12400 Series

Бренд: Baker Hughes Страницы: 81

Бренд: Omer Страницы: 2

Бренд: Teac Страницы: 148

Бренд: IFM Страницы: 25

Бренд: Campbell Страницы: 16

Бренд: FCI Страницы: 44

Бренд: FCI Страницы: 36

Бренд: FCI Страницы: 26

Бренд: Unico Страницы: 10

Бренд: jablotron Страницы: 2

Бренд: Aethra Страницы: 2

Бренд: Flymaster Страницы: 7

Бренд: Rhosonics Страницы: 65

FrameSaver SLV Series

Бренд: Paradyne Страницы: 39

Бренд: Opus Technologies Страницы: 24

Бренд: Fluke Страницы: 6

Бренд: Kabelmat Страницы: 27

Бренд: HTC Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды