6
7 REMOVAL - DISASSEMBLY - REASSEMBLY
IMPORTANT
Do not proceed with removal of the jet pump from
connecting piping unless the jet pump has been
relieved of all pressure or vacuum, has been
allowed to reach ambient temperature and has
been drained or purged of all fluids. Failure to
follow these instructions could result in personal
injury or property damage.
To disassemble the unit, first attach a short
piece of pipe to the suction connection as a
handle. Then, grip the nozzle flats and rotate in
a counterclockwise direction.
When ready to reassemble the unit, be sure
the seal face of the nozzle and body are free of
foreign material and raised metal due to nicks.
A non-hardening pipe seal compound may
be applied to the threads to further promote
sealing. Thread the body back on the nozzle
turning in a clockwise direction.
8 DISPOSAL AT END OF USEFUL LIFE
Penberthy jet pumps are used in a variety of
fluid applications. By following the appropriate
federal and industry regulations, the user
must determine the extent of preparation and
treatment the jet pump must incur before its
disposal. A Material Safety Data Sheet (MSDS)
may be required before disposal services accept
certain components.
Metal, glass and polymers should be recycled
whenever possible. Refer to order and
relevant technical data sheet for materials of
construction.
PENBERTHY
MODELS U, L AND 2NC FABRICATED METAL CONSTRUCTION JET PUMPS
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
9 TELEPHONE ASSISTANCE
If you are having difficulty with your jet pump,
contact your local Penberthy distributor. So that
we may assist you more effectively, please have
as much of the following information available
as possible when you call:
- Model number
- Name of the company from whom you
purchased the jet pump
- Invoice number and date
- Process conditions (pressure, flow rates, tank
shape, etc.)
- A brief description of the problem
- Troubleshooting procedures that failed
If attempts to solve your problem fail, you may
request to return your jet pump to the factory
for intensive testing. You must obtain a Return
Authorization (R.A.) number from Emerson
before returning anything. Failure to do so will
result in the unit being returned to you without
being tested, freight collect. To obtain an R.A.
number, the following information (in addition to
that above) is needed:
- Reason for return
- Person to contact at your company
- 'Ship-to' address
There is a minimum charge for evaluation
of non-warranty units. You will be contacted
before any repairs are initiated should the cost
exceed the minimum charge. If you return a
unit under warranty, but it is not defective, the
minimum charge will apply.