Emerson Metro MPS-4009 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 50

Emerson Metro MPS-4009 Скачать руководство пользователя страница 44

44

MPS-4009 Multi-Chemistry Power Supply Operations Manual Supplement

InterMetro Industries Corporation

Storage and Transport Conditions

Environmental conditions for shipping and storage are:

•

Ambient temperature range of -40°C to +70°C (-40°F to 160°F).

•

Relative humidity range of 10% to 100%.

•

Atmospheric pressure range of 14.76 in. Hg to 31.29 in. Hg.

Shipment of Power Supply

The MPS-4009 Power Supply is available in 3 battery chemistry options. Depending on the
battery chemistry, the preparation of the shipment is different.

Lithium Nano Phosphate Battery (Li-Nano)

Non Class 9 Shipment:

In the USA the Li-Nano batteries can be disconnected from the power supply for a regular
Ground shipment. The shipping container must have the following marking:

Class 9 Shipment:

Outside the USA in any shipping mode and air or sea transport inside the US, the power
supply must be shipped as fully regulated Class 9 (Hazardous Material / Dangerous Goods).
In this shipping mode the batteries can be connected or disconnected. The shipper must be
certified for Li-Ion Class 9 shipments. The power supply must be shipped per UN3481
Lithium ion batteries contained in equipment on cargo aircraft only.

Typically, a power supply contains two battery packs. Ratings below given per battery pack:

«
...
42
43
44
45
46
...
»

Содержание Metro MPS-4009



















































Отзывы:

Нет отзывов