OUTLET BOX
BLACK SUPPLY WIRE
BLACK/WHITE RECEIVER WIRE
BLACK FAN WIRE
BLUE FAN WIRE
BLUE RECEIVER
WIRE
YELLOW FAN WIRE
YELLOW RECEIVER WIRE
CEILING COVER
WHITE RECEIVER WIRE
WHITE FAN WIRE
WIRE CONNECTOR
RECEIVER
WHITE SUPPLY
WIRE
SUPPLY GROUND
WIRE (GREEN OR
BARE)
HANGER BALL
GROUND WIRE
(GREEN)
HANGER BRACKET
GROUND WIRE
(GREEN)
HANGER BRACKET
BLACK RECEIVER WIRE
OPEN
PORTION OF
RECEIVER
HERE
Figure 18
10
1. Pull the wire leads, coming from the
end of the downrod, and the supply
wires through the open side of the
hanger bracket. (Figure 18).
2. Position the SW105 Receiver
(supplied) in the ceiling cover so that
the flat side of the receiver faces up
and the open portion of the receiver is
to the right, as shown in Figure 18.
How to Wire
Your Ceiling Fan
Turning off wall switch is not sufficient.
To avoid possible electrical shock, be
sure electricity is turned off at the main
fuse box before wiring. All wiring must be
in accordance with National and Local
codes and the ceiling fan must be
properly grounded as a precaution
against possible electrical shock.
!
WARNING
If you feel that you do not have enough
electrical wiring knowledge or
experience, have your fan installed by a
licensed electrician.
CAUTION: To reduce the risk of
electrical shock, disconnect the
electrical supply circuit before
installing the fan, light kit or receiver.
3. Using wire connectors (supplied),
make wiring connections as follows
(Figure 18 and 19):
a. Connect the white fan wire and the
white supply wire to the white
receiver wire (AC IN N/MOTOR N).
b. Connect the black fan wire to the
black receiver wire (TO MOTOR L).
c. Connect the black supply wire to the
black/white receiver wire (AC IN L).
d. Connect the blue fan wire to the
blue receiver wire (BOTTOM
LIGHT).
e. Connect the yellow fan wire to the
yellow receiver wire (UPPER
LIGHT).
f. Connect the green ground wires
from the hanger bracket and the
hanger ball to the supply ground
wire (bare or green).
BP7333 CF750 MAYA ZEN 12/22/06 7:59 AM Page 10
