1592022020 iCHILL 100D EVO QRG EN rel. 2.0 23.02.2022
13/40
9
PARAMETERS
PROGRAMMING WITH THE “HOT KEY 64”
9.1
HOW
TO
PROGRAM
THE
INSTRUMENT
WITH
AN
ALREADY
PROGRAMMED
“HOT
KEY”
(DOWNLOAD)
1.
Power off the instrument
2.
Insert the hot key already programmed (by software Wizmate or other instrument)
3.
Power on the instrument
4.
Automatically the parameters are downloaded
During the download the regulation is locked and
the top display shows the “
doL
” blinking label. At the end of
the download will appear:
•
“End”
if the programming procedure is completely OK, after 30seconds the regulation starts
automatically.
•
“Err”
if the programming procedure has found an error and the parameter have not been
transferred. In this case turn off and then on the instrument supply to repeat the operation or
remove the hot key, with power supply off, to restart the regulation.
9.2
HOW
TO
COPY
THE
PARAMETER
MAP
INTO
THE
“HOT
KEY”
(UPLOAD)
1.
Power on the instrument
2.
Insert the hot key
3.
Enter the function Menu
4.
Select the
UPL
function (on the bottom display)
5.
Push
SET
key and immediately the instrument starts transfer the parameters into the Hot key.
During the upload the regulation is locked and the to
p display shows the “
UPL
” blinking label. At the end of the
UPLOAD will appear:
1.
“End”
if the programming procedure is completely OK, after 30seconds the regulation starts
automatically.
2.
“Err”
if the programming procedure has found an error and the parameter have not been
transferred. Repeat the procedure.
To exit the UPL function push the MENU key or wait the time-out (15 sec).
10
PROGRAMMING USING LOCAL USER INTERFACE
Though the keyboard it is possible to modify the values of the parameters and set for each one of them the
visibility and editability; each parameter can be made visible at different levels of users:
1.
Pr1 User level (default Password = 1)
2.
Pr2 Maintenance level (default Password = 2)
3.
Pr3 OEM level (default Password = 3)
The default password for resetting the alarm history and compressor overload alarm is 4.
Passwords can be customized using specific parameters; in the case in which it is necessary to access the
parameters and the passwords have been changed, it is necessary to contact the machine manufacturer to
obtain the necessary information.
Содержание Lumity IC100D EVO
Страница 1: ...QUICK REFERENCE GUIDE IC100D EVO rel 2 0 ...
Страница 2: ......
Страница 33: ...1592022020 iCHILL 100D EVO QRG EN rel 2 0 23 02 2022 33 40 ...
