6
ETL Model No.: LK70LED/LK71LED/LK72LED/LK74LED/LK77LED/
LK80LED/LK81LED/LK83LED/LK90LED/LK91LED/LK140LED/LK141LED
3.7
Use listed wire connectors (previously removed in
Step 3.3) to make connections (Figures 5 and 6).
Figure 6
SWITCH
CUP/LED
LIGHT
FIXTURE
ASSEMBLY
MOTOR
CONNECTOR
SWITCH CUP/LED
LIGHT FIXTURE
ASSEMBLY
CONNECTOR
COVER PLATE
Figure 7
3. Installation on Emerson Fans Having a
Modular Switch Cup with Center Screw
(Continued)
3.8
Reconnect the motor connector to the switch cup/LED
light fixture assembly connector until you hear an
audible snap (Figure 7).
Carefully tuck all wires, connectors and splices into the
switch cup.
POSITION SWITCH
CUP ONTO
COVER PLATE
REINSTALL
SWITCH
COVER
SCREWS (3)
SWITCH
CUP/LED
LIGHT
FIXTURE
ASSEMBLY
COVER
PLATE
Figure 8
3.9
Position the switch cup/LED light fixture assembly onto
the cover plate (Figure 8).
Reinstall and tighten securely, the three screws that
were previously removed in Step 3.2 into the switch cup
(Figure 8).
WARNING:
To avoid possible fire or electrical
shock, make certain no bare wire strands are
exposed outside wire connectors.
To avoid possible fire or electric shock, be careful not
to pinch wires between switch cup and the cover plate.
WARNING
!
LED LIGHT FIXTURE
ASSEMBLY BLACK
WIRE
LED LIGHT FIXTURE
ASSEMBLY WHITE
WIRE
SWITCH CUP
WHITE WIRE
SWITCH CUP
BLUE WIRE
WIRE
CONNECTOR
WIRE
CONNECTOR
SWITCH CUP
LED LIGHT
FIXTURE
ASSEMBLY
Figure 5
3.6
Connect the white wire from the switch cup to the white
wire of the LED light fixture assembly using the
previously removed wire connector from Step 3.3
(Figure 5).
Connect the blue wire from the switch cup to the black
wire of the LED light fixture assembly using the
previously removed wire connector from Step 3.3
(Figure 5).
BP7502 LK70, 80, 90, 140 LED 10/13/15 3:02 AM Page 6