10
ETL Model No.: LK70LED/LK71LED/LK72LED/LK74LED/LK77LED/
LK80LED/LK81LED/LK83LED/LK90LED/LK91LED/LK140LED/LK141LED
4.10
Route the fan speed control chain through the offset
hole of the bowl cap (Figure 20).
Route the LED light fixture assembly chain through the
center hole of the bowl cap (Figure 20).
Place the bowl cap onto the threaded stud and against
the glass bowl.
NOTE: The bowl cap comes with three options: no holes,
one hole and two holes for pull chain options.
Install and tighten the threaded finial nut onto the
threaded stud of the LED light fixture assembly
(Figure 20).
NOTE: The finial nut comes with two options: no holes
and one hole for pull chain options.
NOTE: It is advisable to periodically check the tightness
of the finial nut.
FAN SPEED
CONTROL CHAIN
LED LIGHT FIXTURE
ASSEMBLY CHAIN
BOWL CAP
FINIAL NUT
THREADED STUD
GLASS
BOWL
Figure 20
COUPLING
WOOD PENDANT
FAN SPEED
CONTROL CHAIN
GLASS
BOWL
WOOD PENDANT
COUPLING
LED LIGHT FIXTURE
ASSEMBLY CHAIN
Figure 21
4. Installation on Emerson Fans Having a
Two-Piece Die-Cast Switch Housing
(Continued)
4.11
Connect the wood pendant (supplied) to the switch pull
chain by sliding the wood pendant (small hole first) onto
the pull chain (Figure 21).
Attach the chain coupling to the end of the chain and
allow the wood pendant to fall down over the
coupling (Figure 21).
FAN SPEED
CONTROL CHAIN
GLASS
BOWL
LED LIGHT FIXTURE
ASSEMBLY CHAIN
Figure 19
4.9
Insert the LED light fixture assembly chain and the fan
speed control switch chain through the hole in the glass
bowl (Figure 19).
Gently place the glass bowl onto the LED light fixture
assembly (Figure 19).
BP7502 LK70, 80, 90, 140 LED 10/13/15 3:02 AM Page 10