Emerson Liebert IntelliSlot Unity-DP Скачать руководство пользователя страница 8

Страница: 8 / 56

Introduction

Liebert

IntelliSlot

Unity

™

Card

YDN23 Support

The Liebert IntelliSlot Unity card supports YD/T-1363 specification for the full range of information

available from managed Liebert NXL

™

or Liebert PeX

™

units.

Trellis

™

Support

The Liebert IntelliSlot Unity-DP card communicates a rich set of Emerson Protocol information to the

Trellis DCIM platform.
Trellis can manage and control Liebert equipment using SNMP, Modbus or the Emerson Protocol.

This allows monitoring all Liebert equipment using Liebert IntelliSlot Web, Liebert IntelliSlot 485,

Liebert IntelliSlot IPBML, Liebert IntelliSlot Web ADPT or Liebert IntelliSlot Unity platform

communication interfaces.

Liebert Nform

Support

Utilizing the Emerson Protocol or SNMP and Web technologies built into each Liebert IntelliSlot

Unity card, Liebert Nform will centrally manage alarm notifications to provide an easy interface to

access critical equipment information.
A downloadable version is available online at:

nform.liebert.com

Liebert MultiLink

Support

The Liebert IntelliSlot Unity card integrates with Liebert’s MultiLink software to provide

unattended, graceful operating system shutdown of PCs, servers and workstations. The card can be

monitored by Liebert MultiLink over the network, eliminating the need for serial cables.
For more information on Liebert MultiLink and a downloadable version of Liebert MultiLink

software, visit

multilink.liebert.com

Содержание Liebert IntelliSlot Unity-DP

























































Результаты поиска

Содержание Liebert IntelliSlot Unity-DP

Отзывы:

Похожие инструкции для Liebert IntelliSlot Unity-DP

Бренды по названию

Популярные бренды

Emerson Liebert IntelliSlot Unity-DP, Руководство пользователя

Результаты поиска

Содержание Liebert IntelliSlot Unity-DP

Отзывы:

Похожие инструкции для Liebert IntelliSlot Unity-DP

Бренды по названию

Популярные бренды