Installation
2
2.0
I
NSTALLATION
Make sure you have the following parts and tools before you begin.
Required Parts and Tools
• Liebert IntelliSlot Relay Card (provided)
• #2 (medium) Phillips or small flathead screwdriver
Instructions
1. Turning off the unit prior to installation is suggested, although
not required.
2. Locate the Liebert IntelliSlot port, which is on the rear of some
units, as shown in the examples below. Refer to the unit’s user
manual for port location and orientation.
3. Remove the two retaining screws from the Liebert IntelliSlot port
cover plate on the unit. Save the screws for reassembly in
Step 5
4. As you insert the card, make sure the holes are aligned with those
on the UPS. Initially, the card should slide in freely as you
carefully align screw holes. As you feel it click into place, press
firmly to ensure solid seating in the slot.
5. Use the screwdriver to secure the Liebert IntelliSlot Relay Card to
the UPS chassis with the two retaining screws removed in
.
Make sure the screws are snug, not tight, to avoid damage to the
device.
Remove
screws
Liebert IntelliSlot
Relay Card
