Emerson Liebert APS Скачать руководство пользователя страница 24

Страница: 24 / 104

Installation

Liebert

APS

™

2.2

Unloading the UPS

The unit frame is bolted to the shipping pallet to ensure safety during shipping. Emerson

recommends keeping the unit bolted to the pallet and using a pallet jack to transport the unit to its

installation location.

To unload the UPS:
1. Move the UPS to its installation site and remove the package paper.
2. Use a 17mm (11/16") wrench, to remove the four mounting bolts from the pallet brackets (see

Figure 14

3. Remove the mounting brackets from the UPS with a 10mm wrench or socket or a #3 Phillips

screwdriver.

Figure 14 Remove the mounting brackets

4. Raise the four leveling feet to provide clearance between the pallet and the UPS frame.
5. Connect the ramp to the UPS pallet, as shown in

Figure 15

6. Roll the UPS slowly down the ramp until it is on a level surface, as shown in

Figure 15

Figure 15 Connect the ramp and remove UPS

NOTE

This UPS is very heavy. At least two people should assist in unloading it from the pallet.

Mounting Bolts
(4 places)

Mounting Bracket

Pallet

Detail A

UPS

Содержание Liebert APS









































































































Результаты поиска

Содержание Liebert APS

Отзывы:

Emerson Liebert APS, Руководство пользователя, Страница: 24 / 104

Результаты поиска

Содержание Liebert APS

Отзывы: