background image

NOTICE

The contents of this publication are presented for informational purposes only and while every effort
has been made to ensure their accuracy, they are not to be construed as warranties or guarantees,
expressed or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by Emerson's terms and conditions, which are available upon request. We
reserve the right to modify or improve the designs or specifications of such products at any time.
Emerson does not assume responsibility for the selection, use, or maintenance of any product.
Responsibility for proper selection, use, and maintenance of any Emerson product(s) remains solely
with the purchaser and end user.
To the best of Emerson's knowledge, the information herein is complete and accurate. Emerson makes
no warranties, expressed or implied, including implied warranties of merchantability and fitness for a
particular purpose with respect to this manual and, in no event, shall Emerson be liable for any
incidental, punitive, special, or consequential damages including, but not limited to, loss of
production, loss of profits, loss or revenue, or use and costs incurred including without limitation for
capital, fuel and power, and claims of third parties.
Product names used herein are for manufacturer or supplier identification only and may be trademarks
or registered trademarks of these companies.
All rights reserved. No part of this work may be reproduced or copied in any form or by any means
graphic, electronic, or mechanical without first receiving written permission of Emerson, Shakopee,
Minnesota, United States.

Warranty

1. Limited Warranty: Subject to the limitations contained in Section 2 (Limitation of Remedy

and Liability) herein, Seller warrants that (a) the licensed firmware embodied in the Goods
will execute the programming instructions provided by Seller; (b) that the Goods
manufactured by Seller will be free from defects in materials or workmanship under normal
use and care; and (c) Services will be performed by trained personnel using proper equipment
and instrumentation for the particular Service provided. The foregoing warranties will apply
until the expiration of the applicable warranty period. Products purchased by Seller from a
third party for resale to Buyer (Resale Products) shall carry only the warranty extended by the
original manufacturer. Buyer agrees that Seller has no liability for Resale Products beyond
making a reasonable commercial effort to arrange for procurement and shipping of the
Resale Products. If Buyer discovers any warranty defects and notifies Seller thereof in writing
during the applicable warranty period, Seller shall, at its option, (i) correct any errors that are
found by Seller in the firmware or Services; (ii) repair or replace FOB point of manufacture
that portion of the Goods found by Seller to be defective; or (iii) refund the purchase price of
the defective portion of the Goods/Services. All replacements or repairs necessitated by
inadequate maintenance; normal wear and usage; unsuitable power sources or
environmental conditions; accident; misuse; improper installation; modification; repair; use
of unauthorized replacement parts; storage or handling; or any other cause not the fault of
Seller, are not covered by this limited warranty and shall be replaced or repaired at Buyer’s
sole expense and Seller shall not be obligated to pay any costs or charges incurred by Buyer or
any other party except as may be agreed upon in writing in advance by Seller. All costs of
dismantling, re-installation, freight and the time and expenses of Seller’s personnel and
representatives for site travel and diagnosis under this limited warranty clause shall be borne
by Buyer unless accepted in writing by Seller. Goods repaired and parts replaced by Seller
during the warranty period shall be in warranty for the remainder of the original warranty
period or 90 days, whichever is longer. This limited warranty is the only warranty made by
Seller and can be amended only in a writing signed by an authorized representative of Seller.
The limited warranty herein ceases to be effective if Buyer fails to operate and use the Goods
sold hereunder in a safe and reasonable manner and in accordance with any written
instructions from the manufacturers. THE WARRANTIES AND REMEDIES SET FORTH ABOVE
ARE EXCLUSIVE. THERE ARE NO REPRESENTATIONS OR WARRANTIES OF ANY KIND,
EXPRESSED OR IMPLIED, AS TO MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR
ANY OTHER MATTER WITH RESPECT TO ANY OF THE GOODS OR SERVICES.

June 2021

Quick Start Guide

Quick Start Guide

3

Содержание Incus GDU-01-TT

























Отзывы: