Emerson Incus GDU-01-TT Скачать руководство пользователя страница 2

Important instructions

Emerson designs, manufactures, and tests products to function within specific conditions. Because
these products are sophisticated technical instruments, it is important that the owner and operation
personnel strictly adhere both to the information printed on the product nameplate and to all
instructions provided in this manual prior to installation, operation, and maintenance.

 WARNING

Installing, operating, or maintaining an Emerson product improperly could lead to serious injury or
death from explosion or exposure to dangerous substances.

Comply with all information on the product, in this manual, and in any local and national codes
that apply to the product.
Do not allow untrained personnel to work with this product.
Use Emerson parts and work procedures specified in this manual.

In-depth specialist knowledge is required to work with and on the GDU-01-TT.

Authorized personnel for installing, operating, servicing, and maintaining the GDU-01-TT are
instructed and trained qualified personnel of the operating company and the manufacturer.

It is the operating company's responsibility to:

Train staff

Observe safety regulations

Follow the Reference Manual

Operators must:

Have been trained

Have read and understood all relevant sections of the Reference Manual before commencing work

Know the safety mechanisms and regulations

To avoid personal injury and loss of property, do not install, operate, maintain, or service this
instrument before reading and understanding this reference manual and receiving appropriate
training.

 WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to and/or misconfiguration of end
users’ equipment. This could be intentional or unintentional and needs to be protected against.

Physical security is an important part of any security program and fundamental to protecting your
system. Restrict physical access by unauthorized personnel to protect end users’ assets. This is true for
all systems used within the facility.

Quick Start Guide

June 2021

2

Emerson.com

Содержание Incus GDU-01-TT

























Отзывы: