Emerson HF948BS02, Руководство пользователя

Страница: 7 / 72

7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: HF948 & HF956
MOTOR
YOKE
HANGER PIPE
5/16-18
SETSCREW (2)
ALLEN
WRENCH
Figure 6
3.6
Install and securely tighten the two 5/16-18 setscrews in
the motor yoke against the hanger pipe using the allen
wrench, supplied (Figure 6).
It is critical that the setscrews are securely tightened.
Failure to verify that the setscrews are properly installed
(as shown in Figure 5) could result in the fan falling.
WARNING
!
3. Ceiling Fan Assembly
(Continued)
MOTOR
ASSEMBLY
LOWER CANOPY
LOWER CANOPY COLLAR
HANGER PIPE
ALLEN WRENCH
SETSCREW
Figure 7
3.7
Slide the lower canopy down the hanger pipe and securely
tighten the setscrew on the lower canopy collar against the
hanger pipe using the supplied allen wrench (Figure 7).
BLADE
GASKETS (3)
MOTOR ASSEMBLY
Figure 8
3.8
CAUTION: Blades come in balanced sets of three. Do
not mix blades if installing more than one fan.
Install the three blade gaskets onto the motor assembly in
preparation of blade assembly (Figure 8).
CANOPIES NOT SHOWN
FOR CLARITY