Emerson FloBoss S600 Скачать руководство пользователя страница 11

Страница: 11 / 108

S600 Instruction Manual

1.3

Config600 Configuration Software

The Config600 configuration software is a suite of editors that enable

you to monitor, configure, and calibrate the S600. The software has

three versions: Config600 Lite, Config600 Lite+, and Config600 Pro.

Note

The S600 will not operate until you send a configuration to it

from the host PC.

IPL 600

A fourth program, Interactive Program Loader 600 (“IPL 600”) , is

available separately from the Config600 software suites. IPL 600

sends VxWorks firmware and receives and sends configurations. IPL

600 is included in all Config600 software suites as the “Config

Transfer” utility.
For more details on using these configuration tools, refer to the on-line

help included with the software or to:

Config600 Pro Software User Manual

(Form A6169).

Config600 Lite Software User Manual

(Form A6170).

Note

Config600 Lite+ is discussed in the

Config600 Lite Software

User Manual

(A6170).

1.3.1 Config600 Lite

Use the Config600 Lite software editor suite to modify pre-developed

configurations, transfer existing configurations, edit items on the front

panel display, and customize reports.

Note

Config600 Lite is typically used to custom-configure a new

S600 during installation.

With Config600 Lite you can:

Edit initialization process data, including orifice size, analog input

scaling, alarm limits, and keypad values.

Build and customize Modbus slave maps, Modbus master polling

sequences, front panel displays, and period report formats.

Customize the alarm system, including alarm groups, suppression,

and inhibits.

Configure system security by setting user names and passwords,

and assigning access levels for each data object on the displays.

Specify the engineering units and totalisation rollover value.

Reflash the CPU module firmware with software upgrades and

transfer configurations via the Transfer Editor (IPL 600).

1.3.2 Config600 Lite+

The Config600 Lite+ software editor suite provides all the

functionality of the Config600 Lite suite, but adds the ability to create

a configuration file.

Revised Jan-07

General Information

1-5

Содержание FloBoss S600













































































































Результаты поиска

Содержание FloBoss S600

Отзывы:

Emerson FloBoss S600, Инструкция по эксплуатации, Страница: 11 / 108

Результаты поиска

Содержание FloBoss S600

Отзывы: