Instruction Manual
D200354X012
4200 Transmitters
March 2011
38
Figure 17. Typical Transmitter Mounting on Fisher 585C or 585CR Actuator
37B4775‐A / DOC
Parts for Mounting the Transmitter on 585
or 585C Actuators (figures 16 and 17)
Key
Description
12
Machine Screw, pl steel (2 req'd)
585 & 585R only
21
Mounting Plate, steel
585C and 585CR
585 and 585R
Size 25, 50
Size 100
23
Cap Screw, zn pl steel
585 and 585R (4 req'd)
585C and 585CR (2 req'd)
24
Washer, (2 req'd)
585C and 585CR only
25
Operating Arm, pl steel
26
Cap Screw, pl steel
27
Square Nut, pl steel
29
Torsional Spring, zn pl steel
30
Lever Assembly
Size 100 w/ 0.75 thru 2.125 inch travel
Size 100 w/ 2.5 thru 4 inch travel
Key
Description
Note
The lever assembly, key 30, is not used with size 25 and 50 actuators.
Individual parts below (key 30A through 30C) are needed.
30A
Lever/Bearing Assembly
30B
Transfer Pin, stainless steel
30C
Pickup Pin, stainless steel
31
Shoulder Screw, stainless steel
32
Hex Cap Screw, pl steel (2 req'd)
33
Stem Bracket
585C and 585CR only
Size 25
Size 50
36
Sleeve, acetal
40
Positioner Bracket, zn pl steel
585 and 585R only
Size 25, 50
Size 100
83
Lockwasher (2 req'd)
585C and 585CR only