manualshive.com logo in svg
background image

9

Trouble Shooting

TROUBLE

PROBABLE CAUSE

SUGGESTED REMEDY

1. Fan/lights fail to

1. Fuse blown or circuit breaker tripped.

1. Check main and branch circuit breaker

operate.

and fuses.

2. Wall switch in OFF position.

2. Turn wall switch to ON.

3. Defective battery in the remote control

3. Check that the battery is good (red

transmitter.

indicator light should light when 
any button is pressed).

4. Code switches in the receiver and transmitter

4. Check that the receiver and transmitter 

are not set in same position.

code switches are set in the same position.

WARNING

: Make sure main power is

turned OFF.

5. Receiver (under the ceiling cover) is 

5. Check that the receiver is properly wired.

improperly wired.

2. Fan sounds noisy.

1. Blades not attached to fan.

1. Attach blades to fan before operating.

2. Screws holding blades to flanges are loose.

2. Tighten screws securely.

3. Fan wobbles

1. Setscrews securing motor coupling are 

1. Raise the upper light glass bowl and 

excessively.

not tightened securely.

tighten setscrews securely.

2. Setscrew in the hanger ball/downrod 

2. Tighten the setscrew in the hanger 

assembly is loose.

ball/downrod assembly.

3. Screws securing fan blade to flange are loose.

3. Check to be sure screws which attach the 

fan blade to the flanges are tight.

4. Hanger bracket and/or ceiling outlet box is not

4. Tighten the hanger bracket screws to the

securely fastened.

outlet box, and/or secure outlet box. 

5. Fan blades out of balance.

5. Interchanging an adjacent (side-by-side)

blade pair can redistribute the weight and
result in smoother operation.

WARNING: 

FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER

BEFORE TROUBLE SHOOTING YOUR FAN.

IMPORTANT CARE INSTRUCTIONS

for your Ceiling Fan

Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth
to avoid scratching the finish.

Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.

Maintenance

Accessories

1. Ceiling Fan Controls (see store or catalog).

2. Downrod Extension Kits (see store or catalog).

Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of an electrical shock.

WARNING

!

This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Company. Substitution of parts or
accessories not designated for use with this product
by Emerson Company could result in personal injury
or property damage.

The use of any other control not specifically
approved for this fan could result in fire, shock and
personal injury.

WARNING

!

WARNING

!

!

!

Содержание EURO CF950BS00


















Отзывы: