background image

7

emersonfans.com

Please contact 1-800-654-3545 for further assistance

U.L. Model No.:  CF4801 and CF4501

3. Ceiling Fan Assembly

(Continued)

BLADE 
FLANGE

FAN BLADE
(Sold Separately)

FLAT WASHER (4)

#10-24 x 14mm PAN HEAD 
BLADE SCREW (4)

Figure 6

10-32 x 18mm OVAL HEAD SCREWS
(2 PER BLADE ASSEMBLY)

Figure 7

#8 - 32 x 3/8" PAN 
HEAD SCREW (2)

SWITCH CUP 
COVER

SWITCH CUP

Figure 8

11.

Use four #10-24 x 14mm pan head screws and flat
washers (supplied) to secure flange to blade (Figure
6). Repeat for the remaining four blades. Illustration
may not show the exact flange you are installing.

12.

Use the 10 round recessed holes in the motor hub
marked with "5" and install the five blade assemblies
(ordered separately) in accordance with Step 13.

13.

Attach one blade assembly to the motor hub using
two 10-32 x 18mm oval head screws (supplied)
(Figure 7). Do not tighten completely at this time.
Install remaining blade assemblies in the same way.
Gently snug all flange screws to the motor hub,
working around the hub in a clockwise sequence.
Next, securely tighten all flange screws, again
working in a clockwise sequence. Failure to follow
this procedure could result in fan wobble. This
completes the blade installation.

NOTE: Take care not to scratch fan housing when
installing blades.

14.

Position the switch cup cover onto the switch cup,
aligning the two holes. Use the two 8-32 x 3/8” pan
head screws to secure cover (Figure 8).

NOTE: Make sure wires are not pinched between
switch cup and switch cup cover.

Содержание CROWN SELECT CF4501AP00





















Отзывы: