5
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF411
3. Ceiling Fan Assembly
4.5" DOWNROD
THREE 80" MOTOR
WIRES (UNTWISTED)
Figure 2
3.2
Separate, untwist and unkink the three 80” Motor Wires.
Route the three 80” Black, Blue, and White Motor Wires
through the Downrod (Figure 2).
MOTOR
COUPLER
4.5"
DOWNROD
LOOSEN PHILLIPS
HEAD SET SCREWS (2)
Figure 3
3.3
Loosen the two Phillips Head Set Screws in the Motor
Coupler for installation of the Downrod (Figure 3).
Seat the Downrod in the Motor Coupler (Figure 3).
Rotate and align the Downrod holes with all the holes in
the Motor Coupler (Figure 3).
PHILLIPS HEAD SET SCREW (LOOSENED)
HANGER BALL
4.5" DOWNROD
PIN
GREEN GROUND WIRE
Figure 1
3.1
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely down
the Downrod (Figure 1).
Remove the Pin from the Downrod, then remove the
Hanger Ball (Figure 1).
Retain the Pin and Hanger Ball for reinstallation in
Step 3.6.
NOTE: Do not loosen the screw holding the green
ground wire.
