f.
Mounting Parts
To minimize vibration and start/stop impulses flexible mounting should be used. Each
Stream compressor is delivered with four colored mounting springs that are installed
between the feet and the condensing unit base plate. These are clamped to avoid
transport damage. It is necessary to remove the transport clamps and to adjust the
mounting spring height before starting up the condensing unit. The adjustment is
described in the picture below.
Due to differences in weight (cylinder / motor side) different springs have been used on
both sides. Springs have different colours for easier identification: violet on motor side
and orange on cylinder side.
g. Packaging
Condensing units are individually packed on a baseboard and a carton is fitted over.
Accessories are mounted. In the unlikely event that the packaging box is damaged, the
condenser might be damaged.
Condensing units can be stacked two high. It is recommended to keep the
unit packaged until final installation. The condensing unit, when boxed, can
be handled by a forklift or pallet truck. The condensing unit without the
packaging must be handled by a forklift.
6. NextGen CoreSense
CoreSense™ is an ingredient brand name for compressor electronics associated with
Copeland™ branded compressors. The CoreSense technology uses the compressor as a
sensor to unlock information from within the compressor, providing value-added
features such as advanced motor protection, diagnostics, power consumption measure-
ment and communication.
Operational position
Transport position
Transport clamp
8
