background image

Product Data Document

420DS-12A

October 1, 2007 - Page 3

Integrated Pump Control 

SCADA RTU

Website:  www.EmersonProcess.com/Remote

Remote Automation Solutions

SCADA Packages 

The Bristol ControlWave Micro and ControlWave 

ExpressPAC integrated SCADA packages, from 

Emerson, are designed and built for out-of-the-box 

installation and startup. The assemblies are fully 

integrated units that combine the PLC/RTU with 

a variety of options commonly required in SCADA 

applications. These include a NEMA 4X rated en-

closure, power supply and battery backup options, 

termination options, display and operator input op-

tions, and wireless communication options. 

Historical Archive

Historical data is stored in three archive files in the 

ControlWave PLC/RTU flash memory. This ensures 

maximum data integrity even in the event of a 

SCADA communication network failure. The his-

torical data archives may be collected periodically 

on a scheduled or demand basis by the OpenBSI 

Harvester utility. This technique also minimizes 

communication bandwidth requirements significantly 

benefiting radio and cellular network architectures.

Daily Archive:

Stores 35 days of time-stamped minimums, maxi

-

mums, averages and totals

Hourly Archive:

Stores hourly time-stamped minimums, maximums, 

averages and totals

Trend Archive:
The Trend Archive stores instantaneous values at a 

fixed period from one minute to sixty minutes.

Setup and Configuration

As mentioned earlier, the

 

ControlWave pump control 

SCADA application is pre-programmed. The unit 

only needs site specific configuration through the 

easy-to-use set of web pages supplied with the ap-

plication software. These configuration web pages 

are accessible through the OpenBSI TechView 

utility. 

ControlWave MIcro  

PLC/RTU SCADA Package

 The ControlWave SCADA packages with the pre-

programmed pump controller application are ideal 

for integrating remote site measurement and control 

into the SCADA system.

Station Control Strategies:

Level control 
Pressure control 
Time control 
Pump lead/lag and pump alteration
Pump interlock and permissive conditions
Manual and PID VFD Control 

TechView allows easy connection to any 

ControlWave PLC/RTU through serial or Ethernet 

ports. The utility is essentially a web page browser 

that really simplifies menu navigation and PLC/RTU 

configuration. 

Содержание Control Wave SCADA RTU







Отзывы: