7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF995
3. Ceiling Fan Assembly
(continued)
LOWER LIGHT
COVER
#8 - 32 x 5/16" PAN
HEAD SCREW (3)
LOWER LIGHT FIXTURE
Figure 6
3.7
Remove one #8 - 32 x 5/16” pan head screw from the
lower light fixture (reserve for later use). Loosen the
other three screws to assemble the lower light cover to
the fixture (Figure 6).
3.8
Position the light cover above the fixture and carefully
tuck the wires and connectors into the space provided
between the cover and fixture as the cover is lowered
onto the fixture. Align the three loosened screws heads
into the key hole slots on the cover. Rotate the cover
clockwise to engage the screw heads. Tighten the
screws and reinstall the previously removed screw to
secure the cover (Figure 6).
NOTE: Be careful not to pinch any wires or
connectors between the lower light cover and the
lower light fixture.
STYROFOAM
PARTIALLY ASSEMBLED
CEILING FAN
Figure 7
3.9
Turn the partially assembled ceiling fan right side up in
preparation for final assembly. Carefully place the
partially assembled ceiling fan on the styrofoam being
careful not to bend the ceiling fan blades (Figure 7).
3.10
Remove the hanger ball from the downrod by loosening
the setscrew in the hanger ball until the ball falls freely
down the downrod (Figure 8). Remove the pin from the
downrod, then remove the hanger ball. Retain the pin
and hanger ball for reinstallation in Step 3.15.
PIN
HANGER
BALL
SETSCREW
DOWNROD
Figure 8
