background image

3

This Manual is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Do not install or use fan if any part is
damaged or missing. Call Toll-Free:

1-800-654-3545

!

WARNING

This product is designed to use only
those parts supplied with this product
and/or any accessories designated
specifically for use with this product by
Emerson Electric Co. Substitution of
parts or accessories not designated for
use with this product by Emerson Electric
Co. could result in personal injury or
property damage.

!

WARNING

Tools Needed for Assembly

One Phillips head screwdriver
One wire stripper
One stepladder
Two 60-watt candelabra base bulbs
(not supplied)

Materials

Wiring, outlet box and box connectors
must be of type required by the local code.
The minimum wire would be a 3-conductor
(2-wire with ground) of the following sizes:

Installed Wire Length

Wire Size A.W.G.

Up to 50 ft.

14

50-100 ft.

12

Before assembling your ceiling fan, refer
to the section on proper method of wiring
your fan (Page 11). If you feel you do not
have enough wiring knowledge or
experience, have your fan installed by a
licensed electrician.

!

WARNING

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each
step is completed, place a check mark in the box. This will insure that all steps
have been completed and will be helpful in finding your place should you be
interrupted.

NOTE: If you are uncertain of part
description, refer to exploded view
illustration.

a. Fan motor assembly
b. One coupling cover
c. One ceiling cover
d. Five fan blades
e. Five blade flanges
f. One light kit assembly
g. One hanger bracket
h. One hanger ball/6” downrod assembly
i. One glass shade
j. One fan/light wall control

(transmitter and receiver)

k. One loose parts bag containing:

1. One clevis pin
2. One hairpin clip
3. Five wire connectors
4. Two #8-32 x 1-1/4” threaded studs

(ceiling cover)

5. Two #8 external tooth lockwashers

(ceiling cover)

6. Two #8-32 knurled knobs

(ceiling cover)

7. Sixteen #10-32 x 5/16” pan head

blade screws

8. Sixteen #10 flat blade washers
9. Eleven #8-32 x 1-1/4” oval head

screws

10. Four #8-32 x 1/4” pan head screws

(light kit assembly)

1. Open carton containing fan. Remove

top half of styrofoam unit. Remove
parts and check to see that you have
received the following parts:

BP7335 Palazzo  1/9/07  9:05 AM  Page 3

Содержание CF704SAB03





















Отзывы: